Phottix Indra 500 TTL Monolight and Battery Kit (PH00307) - Demo
Phottix Indra500 TTL Battery Powered Studio Light
Intended for photographers on the road, the Indra500 TTL Battery-Powered Monolight from offers a design driven by portability, flexibility, and power. Both power cord-free and sync cord-free, the Indra500 is also hassle-free thanks to the Odin receivers for Nikon and Canon cameras built-into every unit. starts with a flash head with all the qualities of a studio flash such as 500Ws of power, adjustable from 1/128 to full power over an 8-stop range. Recycling time is 0. 1 to 2 seconds with the included Li-ion polymer battery and 0. 1 second with the optional AC adapter. Action-stopping flash durations as short as 1/15,000 (t. 1) sec. are possible at reduced power settings for freezing splashes or peak-moment sports shots.
The Indra500's battery is the key to taking studio quality light out into the field. Photo sessions can have a fluid quality not possible when tethered to an AC cord; setups change in seconds rather than minutes - assistants can even handhold the lights. This can be done at distances up to 328' thanks to built-in radio receivers for Nikon and Canon cameras and use of the optional Odin 4-channel transmitter. The battery gets 400 full-power flashes on a 5-hour charge and thousands at minimum power.
This would be an impressive flash head if had just stopped there but the Indra500 is also TTL capable with Nikon and Canon cameras, allowing photographers to seamlessly transition in rapidly changing light conditions using their camera's auto-exposure technology. Using the optional transmitter, TTL power can be adjusted remotely +/- 3 EV, while manual mode has an expanded 8-stop range.
The Indra500 TTL ships with a Li-ion polymer battery, charger and reflector. A 110-220 VAC adapter is available for separate purchase.
TTL Most Monolights function only in manual camera modes, limiting their use in fast-moving environments. The Indra500 TTL opens up new creative possibilities, allowing photographers to shoot in shutter and aperture priority modes while taking advantage of their camera's auto-exposure technology.
High Sync Speeds Traditional Monolights have sync speeds limited to 1/200-1/250 sec. , making balancing flash and ambient light levels problematic. The Indra's High Speed Sync function allows speeds up to 1/8,000 sec. for a much wider exposure latitude.
Second Curtain Sync The Second Curtain Sync function fires the flash at the end of the exposure rather than the beginning, allowing use of slow shutter speeds to create a natural looking blur trail behind subjects in progressive motion.
Flash Bracketing Instead of altering the look of your shot by changing your aperture or shutter speed, let the Indra automatically vary its power to get lighter and darker shots around your prime exposure.
Stroboscopic Mode This mode allows you to capture sequential action by varying the Hertz rate from 100 Hz and the flash frequency from 100 times per exposure.
Built-in Triggering Adjust TTL exposure compensation +/- 3 EV or adjust power 1/3 or full stops over an 8-stop range in manual mode from up to 328' away with the optional Odin transmitter. The Indra has built-in Odin receivers for Nikon and Canon cameras. Strato II users can trigger the Indra 500 too, but in manual mode only.
Upgradeable The Indra500 TTL offers a USB port for future firmware upgrades. As camera technology changes the Indra can change along with it.
Bowens Reflector Mount The Indra500 comes with an umbrella reflector with a Bowens mount. It is also compatible with the other brand accessories that use this mount.
Specifications
Warranty | Limited 2 Year (except battery and consumables) |
NoName | 500 |
Minimum Watt Seconds | 4 |
Mount | Bowens |
Var-Power | 1/1/128 |
Beam Coverage | Approx. 328 ft (100m) |
Zoom Head | N/A |
Off Camera Terminal | 3.5mm sync port |
Wireless Operation | Built-in Odin (Canon and Nikon) and strato II receivers |
Channels | 4 |
Groups | 3 |
Power Source | 5Ah Li-ion battery |
Guide Number | 45/147.6 (ISO100, m/ft) |
Flash Variability | TTL: +/- 3 EV in 1/3-stop increments Manual: 8 Stops: 4.0 - 500 Ws in 1/3 or stop increments |
Recycle Time | 0.1 to 3s With battery: 0.2.0 sec. (Quick Flash mode - 25 full-power flashes/min) |
Flash Duration | 1/250 - 1/15,000 sec t.1 |
Color Temperature | 5,500 K (+/- 200 K) |
Beam Angle | 60 degree |
Modeling Light | 4.5 W LED |
Modeling Light Control | on, off, manual (9 adjustment levels) |
Wireless Remote | Yes |
Frequency Band | 2.4GHz |
Triggering Methods | Odin radio slaves, Strato II, optical slave, sync cord. |
Max Sync Speed | 1/8000 (with Odin and on compatible camera) |
Operating Voltage | 14.8V |
Auto Power Off | No |
Flash Ready indicator | Yes |
Battery Charge Time | N/A |
User Replaceable Flash Tube | Yes |
Fan Cooled | Yes |
Auto Dump | Yes |
Operating Temperature | 5 - 122 F (-15 - 50 C) |
Frequency | 2.4 GHz |
Channels | 4 |
Zones | 3 groups |
Antenna | internal antenna PCB layout |
Display | Yes |
Range | Approx. 328 ft (100m+) |
Max Sync Speed | 1/8000 sec |
Output Power | 2.4 – 3.2 V |
Operating Temperature | ~5 ~ 149 F (15 ~ 65 C) |
Storage Temperature | -22 ~ 185 F (-30 ~ 85 C) |
Includes
Indra 500
S-Mount Reflector
Bag
Shoulder Strap
Battery Pack (5,000mAh), comes with body and cell
Multi-Voltage Charger (US Plug)
3.5m studio light power cable
User manual (in USB)